Skip to Local Navigation
Skip to Content
California State University, Long BeachCalifornia State University, Long Beach
Skip to Content

Konica 420 Instructions

How to Copy Onto Transparencies

Get the instructions in a printable MS Word format or PDF format.

If required, enter a password to activate the copier. Position your originals face up on the document feeder or face down on the document glass.

Open the bypass tray, place your transparencies into the tray as shown circled on the right.

Illustration showing proper transparency loading position.

After a few seconds, the Paper screen should come up as shown on the right. (The circled tray to the right of Tray 2 is the bypass tray) Touch the bypass tray.

Screenshot with circled paper type and tray.

Touch OHP and touch OK.

Screenshot with circled OHP button.

Stop Sign If you do not want to interleave a sheet of paper in between your transparencies, then just press Start on the keypad to begin.

Touch the Application tab as indicated on the right.

Screenshot with circled application tab.

Touch Sheet/Cover/Chapter Insert.

Screenshot with circled Sheet/Cover/Chapter Insert button.

Touch OHP Interleave.

Screenshot of OHP Interleave choice.

Touch the tray that is carrying 8.5 x 11 paper. (In the picture on the right, you would touch tray 1. However, the type of paper in trays 1 and 2 vary in each department.) After choosing the correct tray, touch Blank if you want a blank sheet of paper between the transparencies or touch Copy if you want a copy of the original between the transparencies.

Press Start on the keypad to begin.

Screenshot of paper and tray choices.