Skip to Content
California State University, Long BeachCalifornia State University, Long Beach

Konica 421 Instructions

How to Use the Stapling Feature

  1. Stapling is limited to a maximum of 50 sheets and a minimum of 2 sheets.

    If required, enter a password to activate the copier.  Position your originals face up on the document feeder or face down on the document glass.

    Under the Basic Tab, touch [Finishing].

    Screenshot showing the Basic tab.

  2. Under "Staple", touch either [Corner] or [2 Position].

    Screenshot showing the finishing screen.

    Stop SignStop right here if you are satisfied with the staple position either in the top left corner or on the left side 2 Positions. Press Start on the keypad to begin your copy job with stapling. If you want to change the position of the staples, continue on this procedure.

  3. To change the position of the staples from the default position, touch [Position Setting].

    Screenshot showing Position button.

  4. This menu shows you the different staple positions that are possible.  Touch the desired staple position and confirm that it is correct by looking at the diagram in the middle of this screen.  Press Start on the keypad to begin your copy job with stapling.

    Screenshot showing the Position Setting screen.