Skip to Local Navigation
Skip to Content
California State University, Long BeachCalifornia State University, Long Beach
Skip to Content

Konica 421 Instructions

How to Copy Onto Transparencies

  1. If required, enter a password to activate the copier. Position your originals face up on the document feeder or face down on the document glass.

    Illustration showing proper transparency loading position.

  2. After a few seconds, the Paper screen should come up as shown on the right. Select [Transparency] as the paper type for the bypass tray, and then touch [OK].

    Screenshot of Paper Type screen. Transparency is the upper right button in the second column.

    Stop SignIf you do not want to interleave a sheet of paper in between your transparencies, then just press Start on the keypad to begin.

  3. Touch [Application], and then touch [Sheet/Cover/Chapter Insert].

    Screenshot of the Application tab.

  4. Touch [OHP Interleave].

    Screenshot of Sheet/Cover/Chapter Insert screen. OHP Interleave is the first button.

  5. Touch the tray that is carrying 8.5 x 11paper. In the picture on the right, you would touch tray 1. However, the type of paper in trays 1 and 2 vary in each department.

    Screenshot of the OHP Interleave screen.

  6. After choosing the correct tray, touch Blank if you want a blank sheet of paper between the transparencies or touch Copy if you want a copy of the original between the transparencies. Press Start on the keypad to begin.